ISO 11602-1-2000 消防 手提式和推车式灭火器 第1部分_选择和安装.pdf

标准号：ISO 11602-1-2000
实施状态：作废
中文名称：消防 手提式和推车式灭火器 第1部分:选择和安装
英文名称：Fire protection - Portable and wheeled fire extinguishers - Part 1: Selection and installation
发布日期：2000-07
被替代标准：ISO/TS 11602-1-2010
代替标准：ISO/FDIS 11602-1-2000
采用标准：DIN EN 3-1-1996,MOD;DIN EN 3-4-1996,MOD;DIN EN 1866-1998,MOD
起草单位：ISO/TC 21
标准简介：This part of ISO 11602 gives requirements for the selection and installation of portable and wheeled fire extinguishers. It should be used in conjunction with ISO 11602-2.
Fire extinguishers are intended as a first line of defence against fires of limited size. They are needed even if the property is equipped with automatic sprinklers, standpipe and hose, or other fixed protection equipment.
This part of ISO 11602 is not applicable to permanently installed systems for fire extinguishment, even though portions of such systems may be portable (such as hose and nozzles attached to a fixed supply of extinguishing media).
The requirements in this part of ISO 11602 are minimum requirements. The use of larger, higher rated or greater numbers of extinguishers will, in general, improve protection.
Extinguishers for use on board aircraft, watercraft and vehicles are considered to be outside the scope of this part of ISO 11602.
文件格式：PDF
文件大小：87.49KB
文件页数：16
（以上信息更新时间为：2019-11-23）



文档语言及版本参照下方封面截图：