EN 15967-2011 确定最大爆炸压力和最大压力上升速率的气体和蒸气(取代_CEN EN 13673 - 1,CEN EN 13673 - 2.pdf

标准号：EN 15967-2011
实施状态：现行
中文名称：确定最大爆炸压力和最大压力上升速率的气体和蒸气(取代:CEN EN 13673 - 1,CEN EN 13673 - 2
英文名称：Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
发布日期：2011-08-01
代替标准：EN 13673-1-2003, EN 13673-2-2005
采用标准：DIN EN 15967-2011,IDT;BS EN 15967-2012,IDT;NF S66-702-2011,IDT;SN EN 15967-2011,IDT;OENORM EN 15967-2011,IDTN-EN 15967-2011,IDTN-EN 15967-2013,IDT;SS-EN 15967-2011,IDT;UNI EN 15967:2011-2011,IDT;STN EN 15967-2012,IDT;CSN EN 15967-2012,IDT;DS/EN 15967-2011,IDT;NEN-EN 15967:2011 en-2011,IDT;SFS-EN 15967:en-2011,IDT
标准简介：This European Standard specifies a test method that is designed to produce measurements of explosion pressure and the maximum explosion pressure, the rate of explosion pressure rise and the maximum rate of explosion pressure rise of a quiescent flammable gas/air/inert mixture in closed volume at ambient temperature and pressure. InThis European Standard, the term "gas" includes vapours but not mists. Detonation and decomposition phenomena are not considered inThis European Standard. The pressures and rates of pressure rise measured by the procedures specified inThis European Standard are not applicable to flameproof enclosures, that is enclosures intended to withstand an internal explosion and not to transmit it to an external explosive atmosphere, or any other closed volume where the internal geometry can result in pressure piling. Even in an enclosure of relatively simple geometry the disposition of the internal components can lead to rates of pressure rise significantly higher than those measured usingThis European Standard.This European Standard does not apply to the design and testing of flameproof enclosures in conformity with EN 13463-6 (for non-electrical equipment) and EN 60079-1 (for electrical equipment).
文件格式：PDF
文件大小：1.27MB
文件页数：42
（以上信息更新时间为：2019-11-28）



文档语言及版本参照下方封面截图：