标准号:ISO 12003-2-2002
实施状态:作废
中文名称:农林业用拖拉机.窄轨距轮式拖拉机.第2部分:后悬挂倾翻保护装置
英文名称:Agricultural and forestry tractors - Narrow-track wheeled tractors - Part 2: Rear-mounted roll-over protective structures
发布日期:2002-11
被替代标准:ISO 12003-2-2008
代替标准:ISO/FDIS 12003-2-2002
采用标准:BS ISO 12003-2-2002,IDT
起草单位:ISO/TC 23
标准简介:This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post rollbar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics:
— a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential);
— a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle;
— a mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
文件格式:PDF
文件大小:380.76KB
文件页数:38
(以上信息更新时间为:2019-11-23)
文档语言及版本参照下方封面截图:
点击下方链接查看更多内容。