标准号：ISO 12003-2-2002
实施状态：作废
中文名称：农林业用拖拉机.窄轨距轮式拖拉机.第2部分:后悬挂倾翻保护装置
英文名称：Agricultural and forestry tractors - Narrow-track wheeled tractors - Part 2: Rear-mounted roll-over protective structures
发布日期：2002-11
被替代标准：ISO 12003-2-2008
代替标准：ISO/FDIS 12003-2-2002
采用标准：BS ISO 12003-2-2002,IDT
起草单位：ISO/TC 23
标准简介：This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post rollbar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics:
— a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential);
— a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle;
— a mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.
文件格式：PDF
文件大小：380.76KB
文件页数：38
（以上信息更新时间为：2019-11-23）
ISO 12003-2-2002 农林业用拖拉机.窄轨距轮式拖拉机.第2部分_后悬挂倾翻保护装置.pdf
(380.76 KB)
|
|
