标准号：EN 16576-2014
实施状态：现行
中文名称：汽车燃料.柴油中锰和铁含量的测定.电感耦合等离子体发射光谱(ICP OES)方法
英文名称：Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method
发布日期：2014-11
代替标准：FprEN 16576-2014
采用标准：DIN EN 16576-2015,IDT;BS EN 16576-2014,IDT;NF M07-156-2015,IDT;SN EN 16576-2015,IDT;OENORM EN 16576-2015,IDT;PN-EN 16576-2014,IDT;SS-EN 16576-2014,IDT;UNE-EN 16576-2015,IDT;TS EN 16576-2015,IDT;DS/EN 16576-2015,IDT;UNI EN 16576:2015-2015,IDT;STN EN 16576-2015,IDT;CSN EN 16576-2015,IDT;DS/EN 16576-2015,IDT;NEN-EN 16576:2014 en-2014,IDT;SFS-EN 16576:en-2015,IDT
标准简介：This European Standard specifies a method based on inductively coupled plasma optical emission spectrometry (ICP OES) for the determination of manganese content and of iron content, each from about 0,5 mg/l to about 7,0 mg/l in diesel fuels including those containing up to about 10 % (V/V) fatty acid methylester (FAME). WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. NOTE 1 Manganese and iron contents higher than 7,0 mg/l can be measured after preliminary dilution of the sample with a suitable solvent. However, the precision has not been established for such a procedure. NOTE 2 For the purposes of this European Standard, the term "% (V/V)" is used to represent the volume fraction () of a material.
文件格式：PDF
文件大小：1.05MB
文件页数：16
（以上信息更新时间为：2019-11-28）
EN 16576-2014 汽车燃料.柴油中锰和铁含量的测定.电感耦合等离子体发射光谱(ICP OES)方法.pdf
(1.05 MB)
|
|
