标准号：EN 12516-1-2014
实施状态：现行
中文名称：工业用阀.外壳设计强度.第2部分:钢制阀门外壳的列表法
英文名称：Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
发布日期：2014-10
代替标准：EN 12516-1-2005;FprEN 12516-1-2014;EN 12516-1/AC-2007
采用标准：DIN EN 12516-1-2015,IDT;BS EN 12516-1-2014,IDT;NF E29-300-1-2014,IDT;SN EN 12516-1-2015,IDT;OENORM EN 12516-1-2014,IDT;PN-EN 12516-1-2015,IDT;SS-EN 12516-1-2014,IDT;UNE-EN 12516-1-2016,IDT;TS EN 12516-1-2014,IDT;DS/EN 12516-1-2014,IDT;UNI EN 12516-1:2014-2014,IDT;STN EN 12516-1-2015,IDT;STN EN 12516-1-2016,IDT;CSN EN 12516-1-2015,IDT;DS/EN 12516-1-2014,IDT;NEN-EN 12516-1:2014 en-2014,IDT;SFS-EN 12516-1-2015,IDT;SFS-EN 12516-1:en-2014,IDT
标准简介：This European Standard specifies the tabulation method for determining the wall thickness of valve bodies, bonnets and covers with essentially circular cross-section made in forged, cast or fabricated steel. For valve shells with oval, rectangular or non-circular shapes, see 8.6. The range of PN or Class designations for which thicknesses are tabulated is: PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400, Class 150, Class 300,Class 600, Class 900, Class 1500, Class 2500, Class 4500. Pressure/temperature ratings are specified for each material group for the above PN Standard Class and Special Class designations. The non-destructive examination procedures and acceptance levels that need to be applied to the valve shell components in order for the valve to be used at Special Class pressure/temperature ratings are defined. Details are also given for the alternative rules for small bore valves of DN 65 and smaller designated as Limited Class. This standard does not apply to threaded end valves: - DN 80 or larger; - or which have pressure ratings greater than Class 2500; - or which operate at temperatures greater than 540 °C. Socket welding end valves DN 80 or larger are outside the scope of this standard.
文件格式：PDF
文件大小：3.31MB
文件页数：208
（以上信息更新时间为：2019-11-28）
EN 12516-1-2014 工业用阀.外壳设计强度.第2部分_钢制阀门外壳的列表法.pdf
(3.31 MB)
|
|
