标准号：EN 16602-70-30-2014
实施状态：现行
中文名称：航空产品质量保证.高可靠性电气连接的绕接
英文名称：Space product assurance - Wire wrapping of high-reliability electrical connections
发布日期：2014-10
代替标准：FprEN 16602-70-30-2013
采用标准：DIN EN 16602-70-30-2015,IDT;BS EN 16602-70-30-2014,IDT;ECSS-Q-ST-70-30C-2008,NEQ;NF L90-200-70-30-2016,IDT;PR NF L90-200-70-30,IDT;SN EN 16602-70-30-2015,IDT;OENORM EN 16602-70-30-2015,IDT;PN-EN 16602-70-30-2015,IDT;SS-EN 16602-70-30-2014,IDT;UNE-EN 16602-70-30-2014,IDT;DS/EN 16602-70-30-2014,IDT;UNI CEI EN 16602-70-30:2015-2015,IDT;STN EN 16602-70-30-2015,IDT;CSN EN 16602-70-30-2015,IDT;DS/EN 16602-70-30-2014,IDT;NEN-EN 16602-70-30:2014 en-2014,IDT;SFS-EN 16602-70-30:en-2014,IDT
标准简介：This Standard specifies requirements for preparing and assembling parts to be joined by wire wrapping, as well as the selection, calibration, use and certification of wire wrapping tools. The covered wire-wrapped connections are illustrated in Figure 1 1. This type of connection is similar to "Class A preferred" or "modified" connection detailed in MIL STD 1130, and NASA NHB 5300.4(3H). Only previously tested and qualified wire-wrapped connections are covered by this Standard, which includes four wire sizes from 24 AWG to 30 AWG, and three terminal post sizes up to 1,78 mm maximum diagonal. A step-by step procedure is covered in the informative Annex A. The use of heavier gauge wire and larger terminals is not generally prohibited, but it is considered unlikely that for such dimensions the method of wire-wrapping would be chosen as the electrical interconnection technique. Instead it is assumed that wire larger than 24 AWG will be multi-stranded and terminated by soldering in conformance with ECSS-Q-ST-70-08, or by crimping in conformance with ECSS-Q-ST-70-26. Training and certification requirements for operators and inspectors are defined in clause 5.6.7 and in ECSS-Q-ST-20. With effect from the date of approval, this Standard announces the adoption of the external document on a restricted basis for use in the European Cooperation for Space Standardization (ECSS) system. This standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.
文件格式：PDF
文件大小：2.91MB
文件页数：50
（以上信息更新时间为：2019-11-28）
EN 16602-70-30-2014 航空产品质量保证.高可靠性电气连接的绕接.pdf
(2.91 MB)
|
|
