标准号：EN 1870-3-2014
实施状态：现行
中文名称：木工机械的安全.圆形锯机.第3部分:下锯切锯机和两用锯切锯/圆形锯切机
英文名称：Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
发布日期：2014-11
代替标准：FprEN 1870-3-2014;EN 1870-3+A1-2009
采用标准：DIN EN 1870-3-2015,IDT;BS EN 1870-3-2014,IDT;NF E64-607-3-2015,IDT;SN EN 1870-3-2015,IDT;OENORM EN 1870-3-2014,IDT;PN-EN 1870-3-2015,IDT;SS-EN 1870-3-2014,IDT;UNE-EN 1870-3-2015,IDT;DS/EN 1870-3-2015,IDT;UNI EN 1870-3:2015-2015,IDT;STN EN 1870-3-2015,IDT;CSN EN 1870-3-2015,IDT;DS/EN 1870-3-2015,IDT;NEN-EN 1870-3:2014 en-2014,IDT;SFS-EN 1870-3:en-2015,IDT
标准简介：This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, herein after referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. NOTE 1 For the definition of down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches, see 3.2.2, 3.2.3 and 3.2.4, and for the definition of displaceable machine, see 3.2.8. This document does not apply to: - machines for cross cutting logs; - hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, e. g. bench mounting; NOTE 2 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor- operated electric tools are covered by EN 60745-1:2009 together with EN 60745-2-5:2010; - transportable machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand i.e. maximum mass 25 kg. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-9:2009 and EN 61029-2-11:2009. This document is not applicable to down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches which are manufactured before the date of its publication as European Standard.
文件格式：PDF
文件大小：1.50MB
文件页数：66
（以上信息更新时间为：2019-11-28）
EN 1870-3-2014 木工机械的安全.圆形锯机.第3部分_下锯切锯机和两用锯切锯_圆形锯切机.pdf
(1.5 MB)
|
|
