[欧洲标准] EN 13001-2-2014 起重机安全.通用设计.第2部分:负载动作

[复制链接]
查看3092 | 回复2 | 2019-11-18 15:09 | 显示全部楼层 |阅读模式
标准号:EN 13001-2-2014
实施状态:现行
中文名称:起重机安全.通用设计.第2部分:负载动作
英文名称:Crane safety - General design - Part 2: Load actions
发布日期:2014-08
代替标准:EN 13001-2-2011;FprEN 13001-2-2014;EN 13001-2/AC-2012
采用标准:DIN EN 13001-2-2014,IDT;BS EN 13001-2-2014,IDT;NF E52-012-2014,IDT;SN EN 13001-2-2014,IDT;OENORM EN 13001-2-2014,IDT;PN-EN 13001-2-2014,IDT;SS-EN 13001-2-2014,IDT;UNE-EN 13001-2-2015,IDT;DS/EN 13001-2-2014,IDT;UNI EN 13001-2:2015-2015,IDT;STN EN 13001-2-2015,IDT;STN EN 13001-2-2016,IDT;CSN EN 13001-2-2015,IDT;DS/EN 13001-2-2014,IDT;NEN-EN 13001-2:2014 en-2014,IDT;SFS-EN 13001-2-2016,IDT;SFS-EN 13001-2:en-2014,IDT
标准简介:This European Standard specifies load actions to be used together with the standard EN 13001-1 and EN 13001-3, and as such they specify conditions and requirements on design to prevent mechanical hazards of cranes, and provides a method of verification of those requirements. NOTE Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type. The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this standard is necessary to reduce or eliminate the risks associated with the following hazards: a) Instability of the crane or its parts (tilting). b) Exceeding the limits of strength (yield, ultimate, fatigue). c) Elastic instability of the crane or its parts (buckling, bulging). d) Exceeding temperature limits of material or components. e) Exceeding the deformation limits. This document is not applicable to cranes that are manufactured before the date of its publication as EN.
文件格式:PDF
文件大小:1.78MB
文件页数:68
(以上信息更新时间为:2019-11-28)

EN 13001-2-2014 起重机安全.通用设计.第2部分_负载动作.pdf (1.78 MB)

使用道具 举报