标准号：IEC 62395-1-2006
实施状态：作废
中文名称：工业用和商用电阻跟踪加热系统.第1部分:总则和试验要求
英文名称：Electrical resistance trace heating systems for industrial and commercial applications – Part 1: General and testing requirements (Edition 2.0)
发布日期：2006-08
被替代标准：IEC 62395-1-2013
代替标准：IEC 27/533/FDIS-2006
采用标准：DIN EN 62395-1-2007,IDT;BS EN 62395-1-2006,IDT;EN 62395-1-2006,IDT;NF C79-665-1-2006,IDT;OEVE/OENORM EN 62395-1-2007,IDT;PN-EN 62395-1-2006,IDT;PN-EN 62395-1-2010,IDT
起草单位：IEC/TC 27
标准简介：This part of IEC 62395 specifies requirements for electrical resistance trace heating systems
and includes general test requirements.
This standard pertains to trace heating systems that may comprise either factory-fabricated or
field-assembled (work-site) units, and which may be series heater cables, parallel heater
cables, heater pads or heater panels that have been assembled and/or terminated in
accordance with the manufacturer’s instructions for connection to voltage supplies up to and
including 450-750 V.
This standard also includes requirements for termination assemblies and control methods
used with trace heating systems.
This standard does not include or provide for any applications in potentially explosive
atmospheres.
This standard does not cover induction, impedance or skin effect heating.
Trace heating systems can be grouped into different types of applications and the different
conditions found during and after installation necessitate different requirements for testing.
Trace heating systems are usually certified for a specific type of installation or application.
Typical applications for the different types of installation include, but are not limited to:
a) installations of trace heating for surface heating on pipes, vessels and associated
equipment – applications include:
– freeze protection and temperature maintenance;
– hot water lines;
– oil and chemical lines;
– sprinkler system mains and supply piping;
b) outdoor exposed area installations of trace heating – applications include:
– roof de-icing;
– gutter and down-spout de-icing;
– catch basins and drains;
– rail heating2;
c) installation with embedded trace heating – applications include:
– snow melting;
– frost heave protection;
– floor warming;
– energy storage systems;
– door frames;
d) installations with trace heating inside conduit or piping – applications include:
– snow melting – in conduit;
– frost heave protection – in conduit;
– floor warming – in conduit;
– energy storage systems – in conduit;
– internal trace heating for freeze protection of potable water lines;
– enclosed drains and culverts.
文件格式：PDF
文件大小：2.57MB
文件页数：96
（以上信息更新时间为：2019-11-25）
IEC 62395-1-2006 工业用和商用电阻跟踪加热系统.第1部分_总则和试验要求.pdf
(2.57 MB)
|
|
