标准号：IEC 61300-2-46-2006
实施状态：现行
中文名称：纤维光学互连器件和无源元件.基本试验和测量程序.第2-46部分:试验.湿气热循环
英文名称：Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic
发布日期：2006-07
代替标准：IEC 86B/2304/FDIS-2006
采用标准：DIN EN 61300-2-46-2007,IDT;BS EN 61300-2-46-2006,IDT;EN 61300-2-46-2006,IDT;NF C93-902-46-2006,IDT;OEVE/OENORM EN 61300-2-46-2007,IDT;PN-EN 61300-2-46-2007,IDT;UNE-EN 61300-2-46-2006,IDT
起草单位：IEC/SC 86B
标准简介：The purpose of this part of IEC 61300 is to describe a test to determine the suitability of a fibre optic device to withstand the environmental condition of high humidity and change of temperature which may occur in actual use, storage and/or transport. The test is primarily intended to determine the suitability of fibre optic components under conditions of high humidity - combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. Absorption of moisture may result in swelling that would destroy functional utility, cause loss of physical strength, and cause changes in other important mechanical properties. Degradation of optical properties may also occur. Although not necessarily intended as a simulated tropical test, this test can, nevertheless, be useful in determining moisture absorption of insulating or covering materials.
文件格式：PDF
文件大小：396.30KB
文件页数：28
（以上信息更新时间为：2019-11-25）
IEC 61300-2-46-2006 纤维光学互连器件和无源元件.基本试验和测量程序.第2-46部分_试验.湿气热循环.pdf
(396.3 KB)
|
|
