标准号：IEC 61326-2-5-2006
实施状态：作废
中文名称：测量、控制和实验室用电气设备.电磁兼容性要求.第2-5部分:特殊要求.IEC 61784-1, CP 3/2的带界面现场设备用试验配置、操作条件和性能标准
英文名称：Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
发布日期：2006-06
被替代标准：IEC 61326-2-5-2012
代替标准：IEC 65A/474/FDIS-2006;IEC 61326-2002;IEC 61326 Corrigendum 1-2002
采用标准：DIN EN 61326-2-5-2007,IDT;BS EN 61326-2-5-2007,IDT;EN 61326-2-5-2006,IDT;NF C46-050-2-5-2006,IDT;OEVE/OENORM EN 61326-2-5-2007,IDT;PN-EN 61326-2-5-2006,IDT;UNE-EN 61326-2-5-2007,IDT
起草单位：IEC/SC 65A
标准简介：In addition to the requirements of IEC 61326-1, this part of IEC 61326 treats the particular
features for EMC testing of field devices with interfaces according to IEC 61784-1, CP 3/2.
This part of IEC 61326 covers only the field-bus interface of the equipment.
NOTE The other functions of the equipment are covered by other parts of the IEC 61326 series.
This part of IEC 61326 refers only to field devices intended for use in process control and
process measuring.
For interface operation and the interface parameters, this part of IEC 61326 is in accordance
with IEC 61784-1, CP 3/2. That standard specifies a set of protocol specific communication
profiles based on the IEC 61158 series.
The manufacturer specifies the environment for which the product is intended to be used
and/or selects the appropriate test level specifications of IEC 61326-1.
文件格式：PDF
文件大小：380.17KB
文件页数：26
（以上信息更新时间为：2019-11-25）
IEC 61326-2-5-2006 测量、控制和实验室用电气设备.电磁兼容性要求.第2-5部分_特殊要求.IEC 61784-1, CP 3_2的带界面现场设备用试验配置、操作条件和性能标准.pdf
(380.17 KB)
|
|
