标准号：ISO 14405-1-2010
实施状态：作废
中文名称：几何产品规范(GPS).尺寸公差.第1部分:线性尺寸
英文名称：Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
发布日期：2010-12-15
实施日期：2010-12-15
被替代标准：ISO 14405-1-2016
代替标准：ISO/FDIS 14405-1-2010
采用标准：EN ISO 14405-1-2010,IDT
起草单位：ISO/TC 213
标准简介：This part of ISO 14405 establishes the default specification operator for linear size and defines a number of special specification operators for linear size for feature of size types “cylinder” and “two parallel opposite planes”. It also defines the specification modifiers and the drawing indications for these linear sizes. This part of ISO 14405 covers the following linear sizes:
local size;
two-point size;
spherical size;
section size;
portion size;
global size;
direct global linear size;
least-squares size;
maximum inscribed size;
minimum circumscribed size;
indirect global linear size;
calculated size;
circumference diameter;
area diameter;
volume diameter;
rank-order size;
maximum size;
minimum size;
average size;
median size;
mid-range size;
range size.
This part of ISO 14405 defines tolerances of linear sizes when there is:
a + and/or − limit deviation (e.g. 0/−0,019) (see Figure 9);
an upper limit of size (ULS) and/or lower limit of size (LLS) (e.g. 15,2 max., 12 min. or 30,2/30,181) (see Figure 11);
an ISO tolerance class code in accordance with ISO 286-1 (e.g. 10 h6) (see Figure 10)
with or without modifiers (see Tables 1 and 2).
This part of ISO 14405 provides a set of tools to express several types of size characteristic. It does not present any information on the relationship between a function or a use and a size characteristic.
文件格式：PDF
文件大小：1.10MB
文件页数：44
（以上信息更新时间为：2019-11-22）
ISO 14405-1-2010 几何产品规范(GPS).尺寸公差.第1部分_线性尺寸.pdf
(1.1 MB)
|
|
