标准号：ISO 14171-2010
实施状态：作废
中文名称：焊接消耗品.非金属和微粒钢的埋弧焊用实心焊条,包芯焊条电焊条/熔剂制品.分类
英文名称：Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
发布日期：2010-10-01
实施日期：2010-10-01
被替代标准：ISO 14171-2016
代替标准：ISO 14171-2002;ISO/FDIS 14171-2010
采用标准：BS EN ISO 14171-2010,IDT;EN ISO 14171-2010,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for the classification of electrode/flux combinations and
weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding
of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile
strength of up to 570 MPa. One flux can be classified with different solid wire electrodes and tubular cored
electrodes. The solid wire electrode is also classified separately based on chemical composition.
This International Standard is a combined specification providing for classification utilizing a system based
upon the yield strength and the average impact energy for weld metal of 47 J, or utilizing a system based
upon the tensile strength and the average impact energy for weld metal of 27 J.
a) Clauses, subclauses, and tables which carry the suffix letter “A” are applicable only to electrode/flux
combinations and wire electrodes classified using the system based upon the yield strength and the
average impact energy for weld metal of 47 J, in accordance with this International Standard.
b) Clauses, subclauses, and tables which carry the suffix letter “B” are applicable only to electrode/flux
combinations and wire electrodes classified using the system based upon the tensile strength and the
average impact energy for weld metal of 27 J, in accordance with this International Standard.
c) Clauses, subclauses, and tables which do not have either the suffix letter “A” or the suffix letter “B” are
applicable to all electrode/flux combinations and wire electrodes classified in accordance with this
International Standard.
Fluxes for the single-run and two-run techniques are classified on the basis of the two-run technique.
文件格式：PDF
文件大小：234.60KB
文件页数：28
（以上信息更新时间为：2019-11-22）
ISO 14171-2010 焊接消耗品.非金属和微粒钢的埋弧焊用实心焊条,包芯焊条电焊条_熔剂制品.分类.pdf
(234.6 KB)
|
|
