标准号：ISO 2061-2010
实施状态：作废
中文名称：纺织品.纱线捻度的测定.直接计数法
英文名称：Textiles - Determination of twist in yarns - Direct counting method
发布日期：2010-08-01
实施日期：2010-08-01
被替代标准：ISO 2061-2015
代替标准：ISO 2061-1995;ISO/FDIS 2061-2010
采用标准：DIN EN ISO 2061-2010,IDT;EN ISO 2061-2010,IDT;OENORM EN ISO 2061-2010,IDT;OENORM EN ISO 2061-2010,IDT;PN-EN ISO 2061-2010,IDT;UNE-EN ISO 2061-2010,IDT
起草单位：ISO/TC 38
标准简介：1.1 This International Standard specifies a method for the determination of the direction of twist in yarns,
the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct
counting method.
1.2 This International Standard is applicable to
a) single yarns (spun and filament),
b) plied yarns, and
c) cabled yarns.
Separate procedures are given for each type of yarn. The method is designed primarily for yarns in packages,
but, with special precautions, the procedures can be used for yarns taken from fabrics. It is not suitable for the
determination of twist in a monofilament.
1.3 This International Standard covers the determination of twist in plied and cabled yarns as follows:
a) in plied yarns: the final twist of the plied yarns and the original twist of the single yarn before plying;
b) in cabled yarns:
⎯ the final cabling twist of the yarn;
⎯ the original twist of the plied yarn after plying, but prior to the last stage of processing;
⎯ the twist of the single yarn before plying.
1.4 If desired, the twist of single and plied yarn components as they lie in the final structure can be
determined by the special procedrue given in 10.5.7.
1.5 This International Standard is not applicable, except by agreement, to yarns which stretch more than
0,5 % when the tension increases from 0,5 cN to 1,0 cN per unit linear density of the yarn expressed in tex.
Such yarns can be tested under special conditions of tension which are accepted by all parties interested in
the test results.
1.6 This International Standard is not suitable for products of open-end spinning and intermingled
(interlaced) multifilament yarns.
1.7 This International Standard is not applicable to yarns which are too large to permit their being placed in
the clamps of the testing apparatus without crushing or distortion severe enough to affect the test results.
文件格式：PDF
文件大小：211.09KB
文件页数：18
（以上信息更新时间为：2019-11-22）
ISO 2061-2010 纺织品.纱线捻度的测定.直接计数法.pdf
(211.09 KB)
|
|
