标准号：ISO 1436-2009
实施状态：作废
中文名称：橡胶软管和软管组件.油基或水基液体用金属丝编织增强液压型.规范
英文名称：Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
发布日期：2009-05
被替代标准：ISO 1436-2017
代替标准：ISO/FDIS 1436-2009;ISO 1436-1-2001;ISO 1436-2-2005
采用标准：BS ISO 1436-2009,IDT;GB/T 3683-2011,IDT;prEN 853-2011,NEQ;SS-ISO 1436-2009,IDT;KS M ISO 1436-2014,IDT;GOST ISO 1436-2013,IDT
起草单位：ISO/TC 45
标准简介：This International Standard specifies requirements for six types of wire-braid-reinforced hose and hose
assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are
suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at
temperatures ranging from to −40 °C to +60 °C or oil-based hydraulic fluids HH, HL, HM, HR and HV as
defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C.
This International Standard does not include requirements for end fittings. It is limited to requirements for
hoses and hose assemblies.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of
the hose with the fluid to be used.
文件格式：PDF
文件大小：170.38KB
文件页数：18
（以上信息更新时间为：2019-11-22）
ISO 1436-2009 橡胶软管和软管组件.油基或水基液体用金属丝编织增强液压型.规范.pdf
(170.38 KB)
|
|
