标准号：ISO 5950-2008
实施状态：作废
中文名称：商用和拉制的连续电解镀锡冷轧碳素钢板
英文名称：Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
发布日期：2008-04
被替代标准：ISO 5950-2012
代替标准：ISO 5950-2000;ISO/DIS 5950-2007
采用标准：BS ISO 5950-2008,IDT
起草单位：ISO/TC 17
标准简介：This International Standard applies to cold-reduced carbon steel sheet of commercial and drawing
qualities coated in coil form by electro-deposition of tin. The product is commonly known as electrolytic tincoated
sheet and is used where solderability is desired, appearance is important, or a degree of corrosion
resistance under specific conditions is advantageous and coating mass can be specified. The coating is
expressed as the total coating on both surfaces, in grams per square metre. The coating mass specified
should be compatible with the desired service life, thickness of the base metal and the forming requirements
involved. A designation system (Clause 4) includes the coating designation, coating condition and quality.
Electrolytic tin-coated sheet is normally produced in thicknesses from 0,50 mm to 0,85 mm and widths of 600 mm to 1 050 mm, in coils and cut lengths.
文件格式：PDF
文件大小：164.65KB
文件页数：14
（以上信息更新时间为：2019-11-22）
ISO 5950-2008 商用和拉制的连续电解镀锡冷轧碳素钢板.pdf
(164.65 KB)
|
|
