标准号：ISO 124 AMD 2-2008
实施状态：作废
中文名称：橡胶乳.总固体含量的测定.修改件2:温度高于105℃时的测定
英文名称：Latex, rubber - Determination of total solids content - Amendment 2: Determination at temperatures higher than 105 °C
发布日期：2008-01
被替代标准：ISO 124-2008
代替标准：ISO 124 FDAM 2-2007
采用标准：NF T42-003/A2-2008,IDT
起草单位：ISO/TC 45
标准简介：Page 1, Subclause 4.2
Replace “or 105 °C ± 5 °C” by “or at any temperature from 105 °C to 160 °C, accurate to ± 5 °C”.
Page 2, Clause 6
At the end of the introductory paragraph, add the following sentence:
“For synthetic rubber latex dried in accordance with 6.1, a higher drying temperature can be used by
agreement between the interested parties in order to shorten the drying time (see Annex B).”
Page 2, Subclause 6.1, second paragraph
In the first sentence, after “heat it at 70 °C ± 2 °C for 16 h or at 105 °C ± 5 °C for 2 h”, insert:
“or at a higher temperature (from 110 °C ± 5 °C to 160 °C ± 5 °C) for a shorter drying time (see Annex B)”.
After “Return the dish to the oven for 30 min if the original drying temperature used was 70 °C ± 2 °C, or for
15 min if the drying temperature was 105 °C ± 5 °C”, add:
“or for 10 min if the drying temperature was from 110 °C ± 5 °C to 160 °C ± 5 °C”.
In the last sentence, add “or 10 min” between “Repeat the drying procedure for periods of 30 min or 15 min”
and “as appropriate”.
Page 4
Add new Annex B.
Page 5
Add new Annex C.
文件格式：PDF
文件大小：209.13KB
文件页数：10
（以上信息更新时间为：2019-11-22）
ISO 124 AMD 2-2008 橡胶乳.总固体含量的测定.修改件2_温度高于105℃时的测定.pdf
(209.13 KB)
|
|
