标准号：ISO 5600-2007
实施状态：作废
中文名称：橡胶.用锥形件测定与刚性材料的粘合强度
英文名称：Rubber - Determination of adhesion to rigid materials using conical shaped parts
发布日期：2007-07
被替代标准：ISO 5600-2011
代替标准：ISO 5600-1986;ISO/FDIS 5600-2007
采用标准：BS ISO 5600-2007,IDT
起草单位：ISO/TC 45
标准简介：This International Standard specifies a method for the determination of the static vulcanized adhesion
strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.
The adhesion is obtained by a bonding system which can include not only the rigid material and the
rubber compound, but other elements such as thin alloy coatings or chemical treatments of rigid parts and
either a single cement or both primer and cover cements. The bonding system for preparing the test pieces
should be adequately specified by the user, but provision is made in this International Standard for the evaluation of different types of failure related to a complex bonding system.
The method is designed primarily for test pieces prepared in the laboratory under standard conditions in
order to provide data for development and control of bonding systems and their components, such as cements
or special rubber compounds, and of methods of manufacture. While intended to be applied where the rubber
is bonded to rigid supporting pieces, it might not cover such cases where the support, although of highmodulus
material, has a low rigidity due to small transverse dimensions, as in the case of rubber bonded to metal wires, cords or thin sheets.
文件格式：PDF
文件大小：136.89KB
文件页数：10
（以上信息更新时间为：2019-11-22）
ISO 5600-2007 橡胶.用锥形件测定与刚性材料的粘合强度.pdf
(136.89 KB)
|
|
