标准号：ISO 4437-2007
实施状态：作废
中文名称：燃气用埋地聚乙烯(PE)管道.米制系列.规范
英文名称：Buried polyethylene (PE) pipes for the supply of gaseous fuels - Metric series - Specifications
发布日期：2007-06
被替代标准：ISO 4437-1-2014;ISO 4437-5-2014;ISO 4437-3-2014;ISO 4437-2-2014
代替标准：ISO 4437-1997;ISO/FDIS 4437-2007;ISO 4437 Technical Corrigendum 1-1999
采用标准：BS ISO 4437-2007,IDT;GOST R 50838-2009,IDT
起草单位：ISO/TC 138
标准简介：This International Standard specifies the general properties of the polyethylene (PE) compounds for the
manufacture of pipes, the physical and mechanical properties of the pipes made from these compounds, and
the requirements for the marking of such pipes, intended to be used for the supply of gaseous fuels.
It deals with three types of pipe:
⎯ PE pipes (outside diameter dn) including any identification stripes;
⎯ PE pipes with co-extruded layers on either or both the outside and/or inside of the pipe (total outside
diameter dn) as specified in Annex C, where all layers have the same MRS rating;
⎯ PE pipes (outside diameter dn) with a peelable, contiguous thermoplastics additional layer on the outside
of the pipe (“coated pipe”) as specified in Annex D.
This International Standard also gives guidance on a calculation and design scheme on which the maximum
operating pressure (MOP) of the pipes is based. The pipes are intended to be buried.
NOTE For above-ground application of pipes conforming to this International Standard, the pipes need always to be
protected by a casing pipe.
文件格式：PDF
文件大小：234.87KB
文件页数：28
（以上信息更新时间为：2019-11-22）
ISO 4437-2007 燃气用埋地聚乙烯(PE)管道.米制系列.规范.pdf
(234.87 KB)
|
|
