标准号：ISO 230-7-2006
实施状态：作废
中文名称：机床试验规程.第7部分:转动轴的几何精度
英文名称：Test code for machine tools - Part 7: Geometric accuracy of axes of rotation
发布日期：2006-11
被替代标准：ISO 230-7-2015
代替标准：ISO/FDIS 230-7-2006
采用标准：BS ISO 230-7-2007,IDT;NF E60-100-7-2007,IDT;JIS B 6190-7-2008,IDT;UNE-ISO 230-7-2008,IDT
起草单位：ISO/TC 39
标准简介：This part of ISO 230 is aimed at standardizing methods of specification and test of the geometric accuracy of
axes of rotation used in machine tools. Spindles, rotary heads and rotary and swivelling tables of machine
tools constitute axes of rotation, all having unintended motions in space as a result of multiple sources of
errors.
This part of ISO 230 covers the following properties of spindles:
axis of rotation error motion;
speed-induced axis shifts.
The other important properties of spindles, such as thermally induced axis shifts and environmental
temperature variation-induced axis shifts, are dealt with in ISO 230-3.
This part of ISO 230 does not cover the following properties of spindles:
angular positioning accuracy (see ISO 230-1 and ISO 230-2);
runout of surfaces and components (see ISO 230-1);
tool holder interface specifications;
inertial vibration measurements (see ISO 230-8);
noise measurements (see ISO 230-5);
rotational speed range and accuracy (see ISO 10791-6 and ISO 13041-6);
balancing measurements or methods (see ISO 1940-1 and ISO 6103);
idle run loss (power loss);
thermal drift (see ISO 230-3).
文件格式：PDF
文件大小：1.22MB
文件页数：68
（以上信息更新时间为：2019-11-22）
ISO 230-7-2006 机床试验规程.第7部分_转动轴的几何精度.pdf
(1.22 MB)
|
|
