标准号：ISO 23277-2006
实施状态：作废
中文名称：焊缝的无损检验.焊缝的穿透试验.验收等级
英文名称：Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
发布日期：2006-10
被替代标准：ISO 23277-2015
代替标准：ISO/FDIS 23277-2006
采用标准：DIN EN ISO 23277-2010,IDT;DIN EN ISO 23277-2009,IDT;BS EN ISO 23277-2010,IDT;EN 1289-1998,IDT;EN 1289/A1-2002,IDT;EN 1289/A2-2003,IDT;EN ISO 23277-2009,IDT;FprEN ISO 23277-2009,IDT;NF A89-541-2010,IDT;A89-541PR,IDT;SN EN ISO 23277-2010,IDT;OENORM EN ISO 23277-2009,IDT;OENORM EN ISO 23277-2009,IDT;PN-EN ISO 23277-2010,IDT;UNE-EN ISO 23277-2010,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies acceptance levels for indications from surface breaking imperfections in
metallic welds detected by penetrant testing.
The acceptance levels are primarily intended for use during manufacture examination, but where appropriate
they can be used for in-service inspection.
The acceptance levels in this International Standard are based on detection capabilities that can be expected
when using techniques specified in ISO 3452 and parameters recommended in Annex A. The acceptance
levels can be related to welding standards, application standards, specifications or codes. Such a relationship
is shown in ISO 17635 for ISO 5817 and ISO 10042.
文件格式：PDF
文件大小：157.60KB
文件页数：10
（以上信息更新时间为：2019-11-22）
ISO 23277-2006 焊缝的无损检验.焊缝的穿透试验.验收等级.pdf
(157.6 KB)
|
|
