标准号：ISO 16592-2006
实施状态：作废
中文名称：微光束分析.电子探针显微分析.用校准曲线法测定钢的碳含量的指南
英文名称：Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
发布日期：2006-09
被替代标准：ISO 16592-2012
代替标准：ISO/FDIS 16592-2006
采用标准：BS ISO 16592-2006,IDT;GB/T 15247-2008,IDT;NF X21-007-2008,IDT;X21-007PR,IDT
起草单位：ISO/TC 202
标准简介：This International Standard gives guidance on a method for the determination of the carbon content in steels containing other alloying elements (less than 1 % to 2 % by mass) using the calibration curve method. It specifies the sample preparation, X-ray detection, establishment of the calibration curve and the procedure for the determination of the uncertainty of the measured carbon content. It is applicable to steels containing a mass fraction of carbon of less than 1,0 %. The method is not applicable to steels with higher carbon contents, which could significantly affect the accuracy of the analysis results.
This International Standard applies to analyses performed using normal beam incidence and wavelength-dispersive X-ray spectrometry; it is not designed to be used for energy-dispersive X-ray spectrometry.
文件格式：PDF
文件大小：232.72KB
文件页数：18
（以上信息更新时间为：2019-11-22）
ISO 16592-2006 微光束分析.电子探针显微分析.用校准曲线法测定钢的碳含量的指南.pdf
(232.72 KB)
|
|
