标准号：ISO 6149-4-2006
实施状态：现行
中文名称：用于传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第4部分:内外六角气门栓的尺寸、设计、试验方法和要求
英文名称：Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
发布日期：2006-05
代替标准：ISO/DIS 6149-4-2005
采用标准：DIN EN ISO 6149-4-2015,IDT;DIN EN ISO 6149-4-2014,IDT;BS EN ISO 6149-4-2006,IDT;GB/T 2878.4-2011,MOD;EN ISO 6149-4-2014,IDT;FprEN ISO 6149-4-2014,IDT;NF E48-050-4-2006,IDT;NF E48-050-4-2015,IDT;SN EN ISO 6149-4-2015,IDT;OENORM EN ISO 6149-4-2015,IDT;OENORM EN ISO 6149-4-2014,IDT;PN-EN ISO 6149-4-2015,IDT;SS-EN ISO 6149-4-2015,IDT;SS-ISO 6149-4-2006,IDT;UNE-EN ISO 6149-4-2015,IDT;DS/EN ISO 6149-4-2015,IDT;UNI EN ISO 6149-4-2015-2015,IDT;STN EN ISO 6149-4-2015,IDT;CSN EN ISO 6149-4-2015,IDT;DS/EN ISO 6149-4-2015,IDT;NEN-EN-ISO 6149-4-2014 en-2014,IDT;NEN-ISO 6149-4-2006 en-2006,IDT
起草单位：ISO/TC 131
标准简介：This part of ISO 6149 specifies dimensions and performance requirements for external hex and internal hex port plugs for use with ISO 6149-1 ports.
Port plugs in accordance with this part of ISO 6149 can be used at working pressures up to 63 MPa (630 bar1)). The permissible working pressure depends upon the plug end size, materials, design, working conditions, application, etc.
Conformance to the dimensional information in this part of ISO 6149 does not guarantee rated performance. It is necessary that each manufacturer perform testing according to the specification contained in this part of ISO 6149 to assure that components comply with the performance ratings.
文件格式：PDF
文件大小：240.66KB
文件页数：18
（以上信息更新时间为：2019-11-22）
ISO 6149-4-2006 用于传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第4部分_内外六角气门栓的尺寸、设计、试验方法和要求.pdf
(240.66 KB)
|
|
