标准号：ISO 12086-2-2006
实施状态：作废
中文名称：塑料.含氟聚合物分散体模塑和挤塑材料.第2部分:试样的制备和性能的测定
英文名称：Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
发布日期：2006-02
被替代标准：ISO 20568-2-2017
代替标准：ISO 12086-2-1995;ISO/FDIS 12086-2-2005
采用标准：DIN EN ISO 12086-2-2006,IDT;BS EN ISO 12086-2-2006,IDT;EN ISO 12086-2-2006,IDT;NF T51-553-2-2006,IDT;SN EN ISO 12086-2-2006,IDT;OENORM EN ISO 12086-2-2006,IDT;OENORM EN ISO 12086-2+AC-2009,IDT;PN-EN ISO 12086-2-2006,IDT;PN-EN ISO 12086-2-2006,IDT;UNE-EN ISO 12086-2-2006,IDT;KS M ISO 12086-2-2011,IDT;KS M ISO 12086-2-2016,IDT;DS/EN ISO 12086-2-2006,IDT;UNI EN ISO 12086-2-2006-2006,IDT;STN EN ISO 12086-2-2006,IDT;CSN EN ISO 12086-2-2006,IDT;DS/EN ISO 12086-2-2006,IDT;NEN-EN-ISO 12086-2-2006 en-2006,IDT
起草单位：ISO/TC 61
标准简介：1.1 This part of ISO 12086 describes the preparation of test specimens and provides test methods to define
characteristics of thermoplastic fluoropolymer resins. Results from the testing may be used as the basis for
designation, material specifications or both. This part of ISO 12086 describes the conditions of test for
determining both designatory and other properties of the homopolymers and various copolymers of
fluoromonomers, as dispersions or powders for moulding, extrusion and other uses. The test procedures
included are appropriate for, but are not restricted to, the fluoropolymers listed in Clause 4 and for which
designatory properties are specified in ISO 12086-1.
1.2 The properties of semi-finished and finished products made from fluoropolymer resins depend on the
material used, the shape of the product, the physical and morphological state of the material resulting from the
processing operations, and on the test conditions. Therefore, to obtain reproducible test results, the defined
methods of preparation of test specimens and defined test conditions given in this part of ISO 12086 must be
applied.
1.3 Agreements between vendor and purchaser should preferably be based on properties measured using
the specimens and test conditions described in this part of ISO 12086.
文件格式：PDF
文件大小：613.10KB
文件页数：50
（以上信息更新时间为：2019-11-22）
ISO 12086-2-2006 塑料.含氟聚合物分散体模塑和挤塑材料.第2部分_试样的制备和性能的测定.pdf
(613.1 KB)
|
|
