标准号：ISO 17643-2005
实施状态：作废
中文名称：焊接的无损检验.用矢量分析的焊接涡流检验
英文名称：Non-destructive testing of welds - Eddy current testing of welds by complex-plane analysis
发布日期：2005-07
被替代标准：ISO 17643-2015
代替标准：ISO/FDIS 17643-2005
采用标准：DIN EN 1711-2000,IDT
起草单位：ISO/TC 44
标准简介：This International Standard defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, parent materials).
Eddy current testing can also be specified for use with non-ferritic materials, for example in an application standard.
The techniques can be applied to coated and uncoated objects during fabrication and in service, both onshore and offshore.
Eddy current testing can be carried out on all accessible surfaces and on welds of almost any configuration.
Unless otherwise specified for specific points in this International Standard, the general principles of EN 12084 apply.
NOTE Eddy current testing is usually performed in the as-welded condition. However, the accuracy of the results can be affected by very rough surface finishes.
文件格式：PDF
文件大小：252.48KB
文件页数：22
（以上信息更新时间为：2019-11-22）
ISO 17643-2005 焊接的无损检验.用矢量分析的焊接涡流检验.pdf
(252.48 KB)
|
|
