标准号：ISO 4498-2005
实施状态：作废
中文名称：不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定
英文名称：Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
发布日期：2005-06
被替代标准：ISO 4498-2010
代替标准：ISO/FDIS 4498-2005;ISO 4498-1-1990;ISO 4498-2-1981
采用标准：DIN EN ISO 4498-2007,IDT;DIN EN ISO 4498-2006,IDT;DIN ISO 4498-2005,IDT;DIN ISO 4498-1999,IDT;BS EN ISO 4498-2007,IDT;BS ISO 4498-2005,IDT;EN ISO 4498-2007,IDT;prEN ISO 4498-2006,IDT;NF A95-321-2008,IDT;A95-321PR,IDT;SN EN ISO 4498-2007,IDT;OENORM EN ISO 4498-2007,IDT;OENORM EN ISO 4498-2006,IDT;UNE-EN ISO 4498-2007,IDT
起草单位：ISO/TC 119
标准简介：This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals.
1 Procedure 1 determines the apparent hardness of the whole material.
Procedure 1
— applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface,
— applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface,
— therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, and by carburising, carbonitriding, nitrocarburising or sulphidising), and
— applies to materials which have been induction hardened.
2 Procedure 2 determines the microhardness of the metal phase.
Procedure 2
— applies to all types of sintered metal materials.
— is used, in particular, to determine the hardness profile of case-hardened or carbonitrided materials according to the method described in ISO 4507.
— also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.
NOTE However, it should be noted that international agreement has not yet been reached on a number of factors involved in microhardness testing. Nevertheless, the parameters defined in Procedure 2 are important enough to enable a considerable measure of standardisation of extensively used practices.
文件格式：PDF
文件大小：208.03KB
文件页数：20
（以上信息更新时间为：2019-11-22）
ISO 4498-2005 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定.pdf
(208.03 KB)
|
|
