标准号：ISO 6103-2005
实施状态：作废
中文名称：粘合磨料产品.砂轮交货时的可允许不平衡性.静态试验
英文名称：Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing
发布日期：2005-04
被替代标准：ISO 6103-2014
代替标准：ISO 6103-1999;ISO/FDIS 6103-2004
采用标准：DIN EN ISO 6103-2005,IDT;BS EN ISO 6103-2005,IDT;EN ISO 6103-2005,IDT;NF E75-200-2005,IDT;JIS R 6243-2008,MOD;SN EN ISO 6103-2005,IDT;OENORM EN ISO 6103-2005,IDT;PN-EN ISO 6103-2005,IDT;PN-EN ISO 6103-2006,IDT
起草单位：ISO/TC 29
标准简介：This International Standard specifies the maximum permissible values of unbalances for various grinding wheels of ISO 603-1 to ISO 603-9 and ISO 603-12 to ISO 603-16 in the as-delivered condition, with an outside diameter D > 115 mm and maximum operating speed vs ≥ 16 m/s.
It also specifies the method for measuring the unbalance and the practical method for testing whether a grinding wheel is acceptable or not.
This International Standard is applicable to bonded abrasive grinding wheels in the as-delivered condition. This International Standard is not applicable to
— diamond, cubic boron nitride or natural stone grinding wheels, or to
— centreless control wheels, lapping and disc wheels, ball wheels or glass grinding wheels.
NOTE 1 The values given refer to the grinding wheel itself, independent of any unbalance which may exist in the balancing arbor or in the means of fastening it to this arbor. These various elements, together with the flanges or hub-flanges, are assumed to be balanced, homogeneous and free from geometrical defects.
NOTE 2 The effects of unbalance are basically
— additional stresses on the arbor, the machine and its mounting,
— excessive wear of the bearings,
— vibration prejudicial to the quality of machining and increased internal stresses in the grinding wheel, and
— increased operator fatigue.
文件格式：PDF
文件大小：197.22KB
文件页数：12
（以上信息更新时间为：2019-11-22）
ISO 6103-2005 粘合磨料产品.砂轮交货时的可允许不平衡性.静态试验.pdf
(197.22 KB)
|
|
