标准号：ISO 17641-2-2005
实施状态：作废
中文名称：金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分:自束试验
英文名称：Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests
发布日期：2005-03
被替代标准：ISO 17641-2-2015
代替标准：ISO/FDIS 17641-2-2003
采用标准：DIN 50120-102-1998,IDT;DIN EN ISO 17641-2-2005,IDT;BS EN ISO 17641-2-2005,IDT;EN ISO 17641-2-2005,IDT;NF A89-215-2-2005,IDT;SN EN ISO 17641-2-2005,IDT;OENORM EN ISO 17641-2-2005,IDT;PN-EN ISO 17641-2-2005,IDT;UNE-EN ISO 17641-2-2005,IDT
起草单位：ISO/TC 44
标准简介：This standard specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests.
The following tests are described:
— T-joint weld cracking test
— Weld metal tensile test
— Longitudinal bend test
The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials.
The standard applies primarily to fully austenitic stainless steels; nickel, nickel base and nickel copper weld metals. The standard can also be used for other weld metals.
This standard describes only how to carry out the tests and report the results. It does not give any acceptance criteria.
文件格式：PDF
文件大小：414.83KB
文件页数：22
（以上信息更新时间为：2019-11-22）
ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分_自束试验.pdf
(414.83 KB)
|
|
