标准号：ISO 18275-2005
实施状态：作废
中文名称：焊接消耗品.高强度钢的手工金属极电弧焊用涂覆电焊条.分类
英文名称：Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification
发布日期：2005-03
被替代标准：ISO 18275-2011
代替标准：ISO/FDIS 18275-2004
采用标准：DIN 8529-1-1992,MOD;JIS Z 3211-2008,MOD
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld heat-treated condition for manual metal arc welding of high-strength steels with a minimum yield strength greater than 500 MPa or a minimum tensile strength greater than 570 MPa.
This International Standard is a combined specification providing a classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal.
1) Subclauses and tables which carry the suffix letter "A" are applicable only to covered electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this International Standard.
2) Subclauses and tables which carry the suffix letter "B" are applicable only to covered electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this International Standard.
3) Subclauses and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all covered electrodes classified under this International Standard.
文件格式：PDF
文件大小：144.86KB
文件页数：3
（以上信息更新时间为：2019-11-22）
ISO 18275-2005 焊接消耗品.高强度钢的手工金属极电弧焊用涂覆电焊条.分类.pdf
(144.86 KB)
|
|
