标准号：ISO 21969-2005
实施状态：作废
中文名称：同医疗气体设备一起使用的高压挠性连接
英文名称：High-pressure flexible connections for use with medical gas systems
发布日期：2005-03
被替代标准：ISO 21969-2009
代替标准：ISO/FDIS 21969-2004
采用标准：DIN EN ISO 21969-2006,IDT;DIN EN ISO 21969-2006,IDT;BS EN ISO 21969-2006,IDT;EN ISO 21969-2006,IDT;prEN ISO 21969-2005,IDT;NF S95-184-2006,IDT;S95-184PR,IDT;SN EN ISO 21969-2006,IDT;OENORM EN ISO 21969-2006,IDT;OENORM EN ISO 21969-2006,IDT;UNE-EN ISO 21969-2007,IDT
起草单位：ISO/TC 121
标准简介：1.1 This International Standard applies to high-pressure flexible connections intended to be connected to
cylinders or cylinder bundles with nominal filling pressures up to 25 000 kPa at 15 °C for use with the following
medical gases:
oxygen;
nitrous oxide;
air for breathing;
helium;
carbon dioxide;
xenon;
mixtures of the gases listed above;
air for driving surgical tools;
nitrogen for driving surgical tools.
1.2 This International Standard applies to high-pressure flexible connections intended to connect cylinders
or cylinder bundles to manifolds within sources of supply of medical gas pipeline systems complying with
ISO 7396-1.
1.3 This International Standard applies to high-pressure flexible connections intended to connect a cylinder
to an inlet port of medical equipment (e.g. anaesthetic workstation or lung ventilator) fitted with an integral
pressure regulator complying with ISO 10524-1.
1.4 This International Standard does not apply to high-pressure flexible connections intended to be used to
fill cylinders nor does it apply to low-pressure flexible hose assemblies that are covered by ISO 5359.
文件格式：PDF
文件大小：232.27KB
文件页数：20
（以上信息更新时间为：2019-11-22）
ISO 21969-2005 同医疗气体设备一起使用的高压挠性连接.pdf
(232.27 KB)
|
|
