标准号:ISO 2307-2005
实施状态:作废
中文名称:纤维绳索.特定物理和机械性能的测定
英文名称:Fibre ropes - Determination of certain physical and mechanical properties
发布日期:2005-02
被替代标准:ISO 2307-2010
代替标准:ISO 2307-1990;ISO/FDIS 2307-2004
采用标准:DIN EN ISO 2307-2005,IDT;BS EN ISO 2307-2005,IDT;EN ISO 2307-2005,IDT;NF G36-051-2005,IDT;SN EN ISO 2307-2005,IDT;OENORM EN ISO 2307-2005,IDT;PN-EN ISO 2307-2005,IDT;PN-EN ISO 2307-2007,IDT;UNE-EN ISO 2307-2005,IDT;GOST R ISO 1140-2007,MOD;GOST R ISO 1141-2007,MOD;GOST R ISO 1181-2007,MOD;GOST R ISO 1346-2007,MOD;GOST R ISO 1969-2007,MOD;GOST R ISO 2307-2007,IDT;GOST R ISO 9554-2007,MOD
起草单位:ISO/TC 38
标准简介:This International Standard specifies, for ropes of different kinds, a method of determining each of the following characteristics:
- linear density;
- lay length;
- braided pitch;
- elongation;
- breaking force.
The linear density, lay length and braided pitch are measured with the rope under a specified tension called the reference tension, as specified in Annex A.
The elongation corresponds to the measured increase in length of the rope when the tension to which it is subjected is increased from an initial value (reference tension) to a value equal to 50 % of the minimum specified breaking strength of the rope.
The breaking force is the maximum force registered (or reached) during a breaking test on the test piece, carried out on a tensile testing machine with constant rate of traverse of the moving element. The breaking force values given in the tables of rope specifications are only valid when this type of testing machine is used.
When it is not possible to test the whole section of rope, the method described in Annex B may be used, subject to agreement between the parties involved.
This International Standard also provides a method for measuring water repellency, lubrication and finish content and heat setting treatment when requested by the customer.
文件格式:PDF
文件大小:526.47KB
文件页数:22
(以上信息更新时间为:2019-11-22)
ISO 2307-2005 纤维绳索.特定物理和机械性能的测定.pdf
(526.47 KB)
|
|