标准号：ISO 14853-2005
实施状态：作废
中文名称：塑料.含水系统中塑料材料富氧菌生物降解性的测定.生物气产生的测量方法
英文名称：Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
发布日期：2005-02
被替代标准：ISO 14853-2016
采用标准：BS ISO 14853-2005,IDT
起草单位：ISO/TC 61
标准简介：This International Standard specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in this International Standard do not necessarily correspond to the optimum conditions for the maximum degree of biodegradation to occur. The test calls for exposure of the test material to sludge for a period of up to 60 days, which is longer than the normal sludge retention time (25 to 30 days) in anaerobic digesters, though digesters at industrial sites can have much longer retention times.
The method applies to the following materials:
— Natural and/or synthetic polymers, copolymers or mixtures thereof;
— Plastic materials which contain additives such as plasticizers, colorants or other compounds;
— Water-soluble polymers;
— Materials which, under the test conditions, do not inhibit the microorganisms present in the inoculum. Inhibitory effects can be determined using an inhibition control or by another appropriate method (see e.g. ISO 13641). If the test material is inhibitory to the inoculum, a lower test concentration, another inoculum or a pre-exposed inoculum can be used.
文件格式：PDF
文件大小：768.14KB
文件页数：36
（以上信息更新时间为：2019-11-22）
ISO 14853-2005 塑料.含水系统中塑料材料富氧菌生物降解性的测定.生物气产生的测量方法.pdf
(768.14 KB)
|
|
