标准号：ISO 15614-13-2005
实施状态：作废
中文名称：金属材料焊接过程的规范和鉴定.焊接过程试验.第13部分:电阻对接焊和电弧对接焊
英文名称：Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Resistance butt and flash welding
发布日期：2005-02
被替代标准：ISO 15614-13-2012
代替标准：ISO/FDIS 15614-13-2004
采用标准：DIN EN ISO 15614-13-2005,IDT;DIN EN ISO 15614-13-2002,IDT;BS EN ISO 15614-13-2005,IDT;EN ISO 15614-13-2005,IDT;NF A89-057-13-2005,IDT;SN EN ISO 15614-13-2005,IDT;OENORM EN ISO 15614-13-2005,IDT;PN-EN ISO 15614-13-2005,IDT;PN-EN ISO 15614-13-2008,IDT;UNE-EN ISO 15614-13-2005,IDT;GOST R ISO 15614-13-2009,IDT
起草单位：ISO/TC 44
标准简介：This part of ISO 15614 specifies the tests which should be used for qualification of welding procedure specifications.
It applies to resistance butt welding and flash welding of metallic materials, e.g. with solid, tubular, flat or circular cross-section. The basic principles of this part of ISO 15614 may be applied to other resistance welding processes when this is specified in the specification.
NOTE This part of ISO 15614 is a part of a series of standards. Details of this series are given in ISO 15607:2003, Annex A.
This part of ISO 15614 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by this part of ISO 15614.
The tests required to qualify the procedure for a particular component/assembly depend on the performance and quality requirements of the component/assembly and should be defined in the design specification.
The tests should be carried out in accordance with this part of ISO 15614, unless more severe tests are specified by the relevant application standard or specification, when these apply.
NOTE Specific service, material, or manufacturing conditions may require more comprehensive testing than is specified by this part of ISO 15614.
Such tests may include:
— microsections;
— fatigue or endurance tests;
— impact test;
— radiographic test;
— ultrasonic test;
— corrosion test;
— tests of components or complete welded assemblies.
This part of ISO 15614 covers the following resistance welding processes as defined in ISO 4063:
— 24 flash welding, using direct current or alternating current with various movement sequences, constant flashing and pulsed flashing;
— 25 resistance butt welding, using direct current or alternating current with various pressure sequences.
文件格式：PDF
文件大小：216.43KB
文件页数：22
（以上信息更新时间为：2019-11-22）
ISO 15614-13-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第13部分_电阻对接焊和电弧对接焊.pdf
(216.43 KB)
|
|
