标准号：ISO 636-2004
实施状态：作废
中文名称：焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类
英文名称：Welding consumables Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels Classification (Third Edition)
发布日期：2004-05
被替代标准：ISO 636-2015
代替标准：ISO 636-1989;ISO/FDIS 636-2004
采用标准：DIN 8559-100-1991,MOD;DIN EN ISO 636-2008,IDT;DIN EN ISO 636-2007,IDT;BS EN ISO 636-2008,IDT;EN ISO 636-2008,IDT;prEN ISO 636-2007,IDT;NF A81-325-2008,IDT;A81-325PR,IDT;SN EN ISO 636-2008,IDT;OENORM EN ISO 636-2008,IDT;OENORM EN ISO 636-2007,IDT;PN-EN ISO 636-2008,IDT;UNE-EN ISO 636-2009,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of rods and wires in the as-welded
condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine grain
steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.
This International Standard is a combined specification providing classification utilizing a system based upon
the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon
the tensile strength and the average impact energy of 27 J of all-weld metal.
1) Paragraphs and tables which carry the suffix letter “A” are applicable only to rods and wires classified
to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal
in accordance with this International Standard.
2) Paragraphs and tables which carry the suffix letter “B” are applicable only to rods and wires classified
to the system based upon the tensile strength and the average impact energy of 27 J of all-weld
metal in accordance with this International Standard.
3) Paragraphs and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable
to all rods and wires classified in accordance with this International Standard.
文件格式：PDF
文件大小：193.93KB
文件页数：18
（以上信息更新时间为：2019-11-22）
ISO 636-2004 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类.pdf
(193.93 KB)
|
|
