ISO 11237-1-2004 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第1部分:用于油基液体

[复制链接]
查看2712 | 回复4 | 2019-6-26 03:11 | 显示全部楼层 |阅读模式
标准号:ISO 11237-1-2004
实施状态:作废
中文名称:橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第1部分:用于油基液体
英文名称:Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 1: Oil-based fluid applications
发布日期:2004-01
被替代标准:ISO 11237-2010
代替标准:ISO/FDIS 11237-1-2003
采用标准:BS ISO 11237-1-2005,IDT
起草单位:ISO/TC 45
标准简介:This part of ISO 11237 specifies requirements for three types of wire-braid-reinforced compact hose and hose
assembly of nominal bore from 6,3 to 31,5. They are suitable for use with hydraulic fluids HH, HL, HM, HR
and HV in accordance with ISO 6743-4 at temperatures ranging from −40 °C to +100 °C.
This part of ISO 11237 does not include requirements for end fittings. It is limited to the performance of hoses
and hose assemblies.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish compatibility of the
hose with the fluid to be used.
文件格式:PDF
文件大小:172.43KB
文件页数:14
(以上信息更新时间为:2019-11-22)

ISO 11237-1-2004 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.第1部分_用于油基液体.pdf (172.43 KB)

使用道具 举报