标准号：ISO 2639-2002
实施状态：现行
中文名称：钢.渗碳层和硬化层深度的测定和检验
英文名称：Steels - Determination and verification of the depth of carburized and hardened cases
发布日期：2002-11
被替代标准：ISO 18203-2016
代替标准：ISO 2639-1982;ISO/FDIS 2639-2002
采用标准：DIN EN ISO 2639-2003,IDT;DIN EN ISO 2639-2001,IDT;BS EN ISO 2639-2002,IDT;GB/T 9450-2005,MOD;NF A04-202-2003,IDT;JIS G 0557-2006,MOD;SN EN ISO 2639-2003,IDT;OENORM EN ISO 2639-2003,IDT;PN-EN ISO 2639-2005,IDT;UNE-EN ISO 2639-2004,IDT
起草单位：ISO/TC 17
标准简介：This International Standard defines the case-hardened depth, and specifies methods for the determination of this depth, in steel.
It is applicable to
a) carburized cases and carbonitrided cases;
b) parts that, when heat treated to final hardness, have a hardness of less than 450 HV 1 at a distance of three times the case-hardened depth, from the surface.
The case-hardened depth is defined by special agreement where these conditions are not met.
For steels that, in the part under test, and at a distance of three times the case-hardened depth from the surface, present a hardness greater than 450 HV 1, the criterion can still be used, provided that a limiting hardness value greater than 550 HV 1 - in steps of 25 units - be selected for the case-hardened depth.
文件格式：PDF
文件大小：190.91KB
文件页数：10
（以上信息更新时间为：2019-11-23）
ISO 2639-2002 钢.渗碳层和硬化层深度的测定和检验.pdf
(190.91 KB)
|
|
