标准号：ISO 14341-2002
实施状态：作废
中文名称：焊料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类
英文名称：Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
发布日期：2002-11
被替代标准：ISO 14341-2010
代替标准：ISO/FDIS 14341-2002
采用标准：DIN EN 440-1994,MOD;DIN EN ISO 14341-2008,IDT;DIN EN ISO 14341-2007,IDT;BS EN ISO 14341-2008,IDT;EN ISO 14341-2008,IDT;prEN ISO 14341-2007,IDT;NF A81-311-2008,IDT;JIS Z 3312-2009,MOD;CAN/CSA-ISO 14341-06-2006,IDT;SN EN ISO 14341-2008,IDT;OENORM EN ISO 14341-2008,IDT;OENORM EN ISO 14341-2007,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies requirements for classification of wire electrodes in the as-welded condition and in the post weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm<up2> or a minimum tensile strength of up to 570 N/mm<up2>. One wire electrode can be tested and classified with different shielding gases.
This document constitutes a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.
1) Paragraphs and tables which carry the suffix letter "A" are applicable only to wire electrodes classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard.
2) Paragraphs and tables which carry the suffix letter "B" are applicable only to wire electrodes classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this International Standard.
3) Paragraphs and tables which have neither the suffix letter "A" nor the suffix letter "B" are applicable to all wire electrodes classified in accordance with this International Standard.
文件格式：PDF
文件大小：206.45KB
文件页数：18
（以上信息更新时间为：2019-11-23）
ISO 14341-2002 焊料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类.pdf
(206.45 KB)
|
|
