标准号：ISO 230-10-2011
实施状态：作废
中文名称：机床试验规程.第10部分:数控机床探测系统测量性能的测定
英文名称：Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
发布日期：2011-05-15
被替代标准：ISO 230-10-2016
代替标准：ISO/FDIS 230-10-2011
采用标准：BS ISO 230-10-2011,IDT;NF E60-100-10-2011,IDT
起草单位：ISO/TC 39
标准简介：This part of ISO 230 specifies test procedures to evaluate the measuring performance of contacting probing
systems (used in a discrete-point probing mode) integrated with a numerically controlled machine tool.
It does not include other types of probing systems, such as those used in scanning mode or non-contacting
probing systems. The evaluation of the performance of the machine tool, used as a coordinate measuring
machine (CMM), is outside the scope of this part of ISO 230. Such performance evaluation involves
traceability issues, is strongly influenced by machine tool geometric accuracy and can, in addition to the
machine tool probing system tests specified in this part of ISO 230, be evaluated according to ISO 10360-2
and ISO 10360-5.
Numerically controlled machine tools can apply contacting probing systems in machining process applications,
such as:
- identification that the correct workpiece has been loaded before machining;
- location and/or alignment of the workpiece;
- measurement of the workpiece after machining, but whilst still on the machine;
- measurement of the position and orientation of the machine tool rotary axes;
- measurement and setting of the cutting tool (radius, length and offset of the tool);
- detection of tool breakage.
NOTE 1 This part of ISO 230 focuses on machining centres, but it is intended that other types of machines, for
instance turning and grinding centres, be included in a future revision of this part of ISO 230.
NOTE 2 This part of ISO 230 does not include non-contacting type of probes (e.g. optical probes) or scanning probes,
but it is intended that they be included in a future revision of this part of ISO 230.
文件格式：PDF
文件大小：471.50KB
文件页数：46
（以上信息更新时间为：2019-11-22）
ISO 230-10-2011 机床试验规程.第10部分_数控机床探测系统测量性能的测定.pdf
(471.5 KB)
|
|
