标准号：ISO 6072-2002
实施状态：作废
中文名称：液压传动.流体和标准合成橡胶材料间的兼容性
英文名称：Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials
发布日期：2002-03
被替代标准：ISO 6072-2011
代替标准：ISO 6072-1986;ISO/FDIS 6072-2001
采用标准：BS ISO 6072-2002,IDT;GB/T 14832-2008,MOD;NF E48-610-1-2004,NEQ;E48-610-1PR,NEQ;NF E48-610-2-2004,NEQ;E48-610-2PR,NEQ;E48-610PR,IDT;JIS B 8671-2006,MOD
起草单位：ISO/TC 131
标准简介：This International Standard specifies test methods for the evaluation of fluids exposed to standard elastomeric materials that have been manufactured in accordance with the specified processes. It allows baseline comparisons of fluids with standard elastomers.
This International Standard provides formulations, mixing and vulcanization procedures for five types of elastomeric compositions:
a) acrylonitrile-butadiene rubber (NBR 1 and NBR 2);
b) fluoroelastomers (FKM 2);
c) ethylene propylene diene rubber (EPDM 1);
d) hydrogenated NBR (HNBR 1).
These procedures evaluate the effect of mineral-based, fire-resistant and biodegradable hydraulic fluids on such compositions by measurement, under controlled conditions, of physical properties of standard test pieces of the suitable test elastomer before and after immersion in the fluids.
This International Standard does not provide formulations of elastomeric materials for actual service, however service elastomers may be tested using these compatibility procedures if required.
NOTE The elastomeric materials used in these formulations are sensitive to fluid variations and have comparatively high swelling characteristics. Stable cure systems should be used to give adequate storage life.
文件格式：PDF
文件大小：256.41KB
文件页数：28
（以上信息更新时间为：2019-11-23）
ISO 6072-2002 液压传动.流体和标准合成橡胶材料间的兼容性.pdf
(256.41 KB)
|
|
