标准号：ISO 13855-2002
实施状态：作废
中文名称：机械安全.保护设备相对于人体部位接近速度的定位
英文名称：Safety of machinery - Positioning of protective equipment with respect to the approach speeds of parts of the human body
发布日期：2002-02
被替代标准：ISO 13855-2010
代替标准：ISO/FDIS 13855-2001
采用标准：DIN EN 999-1998,IDT;GB/T 19876-2005,NEQ;JIS B 9715-2006,IDT;GOST ISO 13851-2006,MOD;GOST ISO 13855-2006,IDT
起草单位：ISO/TC 199
标准简介：This International Standard provides parameters based on values for hand/arm and approach speeds and the methodology to determine the minimum distances from sensing or actuating devices of protective equipment to a danger zone.
These specific devices are:
a) trip devices as defined in EN 292-1:1991, 3.23.5 (specifically electro-sensitive protective equipment, pressure sensitive mats), including those used additionally to initiate operation;
b) two-hand control devices as defined in EN 292-1:1991, 3.23.4 and covered by ISO 13851.
NOTE For the purposes of this International Standard, hold-to-run controls, which are designed to be actuated with one hand, are not considered to be protective equipment.
This International Standard does not apply to protective equipment which is intended to be moved, without tools, nearer to the danger zone than the calculated distance, e.g. pendant two-hand control devices.
The minimum distances derived from this International Standard do not apply to protective equipment used to detect the presence of persons within an area already protected by a guard or electro-sensitive protective equipment.
文件格式：PDF
文件大小：936.82KB
文件页数：26
（以上信息更新时间为：2019-11-23）
ISO 13855-2002 机械安全.保护设备相对于人体部位接近速度的定位.pdf
(936.82 KB)
|
|
