标准号：ISO 15618-1-2001
实施状态：作废
中文名称：从事水下焊接的焊接员资格检验 第1部分：高压湿焊的潜水焊接员
英文名称：Qualification testing of welders for underwater welding - Part 1: Diver-welders for hyperbaric wet welding
发布日期：2001-12
被替代标准：ISO 15618-1-2016
代替标准：ISO/FDIS 15618-1-2000
采用标准：DIN EN ISO 15618-1-2002,IDT;BS EN ISO 15618-1-2002,IDT;EN ISO 15618-1-2001,IDT;NF A88-950-1-2002,IDT;SN EN ISO 15618-1-2001,IDT;OENORM EN ISO 15618-1-2002,IDT;PN-EN ISO 15618-1-2003,IDT;UNE-EN ISO 15618-1-2002,IDT
起草单位：ISO/TC 44
标准简介：This standard applies to welding processes where the skill of the diver-welder has a significant influence on weld quality.
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of diver-welder performance for the welding of steels underwater in hyperbaric wet environment. The recommended format for the certificate of approval testing is given in Annex A.
During the approval test the diver-welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved, information on these aspects is given in Annex B.
This standard is applicable when the diver-welder's testing is required by the purchaser, by inspection authorities or by other organisations.
The welding processes referred to in this standard include those fusion welding processes which are designated as manual or partly mechanised welding. It does not cover fully mechanised and fully automatic processes (see 5.2).
All new approvals should be in accordance with this standard from the date of this issue.
However, this standard does not invalidate previous diver-welder approvals made to former national standards or specifications, providing the intent of the technical requirements is satisfied and the previous approvals are relevant to the application and production work on which they are employed.
Also, where additional tests should be carried out to make the approval technically equivalent it is only necessary to do the additional tests on a test piece which should be made in accordance with this standard. Consideration of previous approvals to national standards or specifications should be at the time of the enquiry/contract stage and agreed between the contracting parties.
The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.
文件格式：PDF
文件大小：515.63KB
文件页数：32
（以上信息更新时间为：2019-11-23）
ISO 15618-1-2001 从事水下焊接的焊接员资格检验 第1部分：高压湿焊的潜水焊接员.pdf
(515.63 KB)
|
|
