标准号：ISO 15500-9-2001
实施状态：作废
中文名称：道路车辆 压缩天然气(CNG)燃料系统部件 第9部分:调压器
英文名称：Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator
发布日期：2001-01
被替代标准：ISO 15500-9-2012
代替标准：ISO/DIS 15500-9-2000
起草单位：ISO/TC 22
标准简介：This part of ISO 15500 specifies tests and requirements for the pressure regulator, a compressed natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.
This part of ISO 15500 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel or dual-fuel applications). It is not applicable to the following:
a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer;
b) fuel containers;
c) stationary gas engines;
d) container mounting hardware;
e) electronic fuel management;
f) refuelling receptacles.
NOTE 1 It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this part of ISO 15500 and tested according to the appropriate functional tests.
NOTE 2 All references to pressure in this part of ISO 15500 are to be considered gauge pressures unless otherwise specified.
NOTE 3 This part of ISO 15500 is based upon a service pressure for natural gas as a fuel of 20 MPa [200 bar<up1)>] settled at 15 ℃. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 25 MPa (250 bar) service pressure system will require pressures to be multiplied by 1,25.
note: 1) 1 bar = 0,1 MPa = 10<up5> Pa; 1 MPa = 1 N/mm<up2>
文件格式：PDF
文件大小：61.37KB
文件页数：10
（以上信息更新时间为：2019-11-23）
ISO 15500-9-2001 道路车辆 压缩天然气(CNG)燃料系统部件 第9部分_调压器.pdf
(61.37 KB)
|
|
