标准号：ISO 15364-2000
实施状态：作废
中文名称：船舶与海上技术 散货船真空/压力阀
英文名称：Ships and marine technology - Pressure/vacuum valves for cargo tanks
发布日期：2000-09
被替代标准：ISO 15364-2007
代替标准：ISO/FDIS 15364-2000
采用标准：DIN EN ISO 15364-2002,IDT;BS EN ISO 15364-2000,IDT;EN ISO 15364-2001,IDT;prEN ISO 15364-2000,IDT;NF J38-540-2002,IDT;J38-540PR,IDT;SN EN ISO 15364-2001,IDT;OENORM EN ISO 15364-2001,IDT;OENORM EN ISO 15364-2001,IDT;UNE-EN ISO 15364-2002,IDT
起草单位：ISO/TC 8
标准简介：This International Standard applies to pressure/vacuum relief valves protecting marine vessel systems, including cargo tanks, that may be subject to gas/vapour pressure or vacuum outside the design parameters of the system/tank. This standard specifies the minimum requirements for performance and testing of pressure/vacuum relief valves, with emphasis on selection of materials, internal finish and surface requirements for pressure/vacuum valves installed on cargo tanks in tankers (see annex A). This standard specifies design and in-service performance criteria and operational testing and maintenance requirements. This standard does not address devices to prevent the passage of flame. Advice on devices to prevent the passage of flame is found in the International Maritime Organization (IMO) "International Convention on the Safety of Life at Sea, 1997" (SOLAS); Chapter II-2, Regulation 59, and IMO Maritime Safety Committee (MSC) Circular No. 677 (MSC/Circ. 677) "Revised Standards for the Design, Testing and Locating of Devices to Prevent the Passage of Flame into Cargo Tanks in Tankers".
文件格式：PDF
文件大小：96.09KB
文件页数：18
（以上信息更新时间为：2019-11-23）
ISO 15364-2000 船舶与海上技术 散货船真空_压力阀.pdf
(96.09 KB)
|
|
