标准号：IEC 61215-1-3-2016
中文名称：地面光伏(PV)模组. 设计质量和型式批准. 第1-3部分: 检测薄膜非晶硅基电池光伏(PV)模组的特殊要求
英文名称：Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
发布日期：2016-12
代替标准：IEC 82/1183/FDIS-2016;IEC 61646-2008
标准简介：This part of IEC 61215 lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open- air climates, as defined in IEC 60721-2-1. This document is intended to apply to all thin-film amorphous silicon (a-Si; a-Si/µc-Si) based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing IEC 61215-1:2016 and IEC 61215-2:2016 requirements for testing. This document does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration. The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual lifetime expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated. This document defines PV technology dependent modifications to the testing procedures and requirements per IEC 61215-1:2016 and IEC 61215-2:2016.
文件格式：PDF
文件大小：1006.87KB
文件页数：22
IEC 61215-1-3-2016 地面光伏(PV)模组. 设计质量和型式批准. 第1-3部分_ 检测薄膜非晶硅基电池光伏(PV)模组的特殊要求.pdf
(1006.87 KB)
|
|
