标准号：ISO 11254-1-2000
实施状态：作废
中文名称：激光和激光设备 光学表面激光导致损伤阈值的测定 第1部分:1-on-1试验
英文名称：Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test
发布日期：2000-06
被替代标准：ISO 21254-1-2011;ISO 21254-2-2011
代替标准：ISO/FDIS 11254-1-2000
采用标准：DIN EN ISO 11254-1-2000,IDT;BS EN ISO 11254-1-2000,IDT;GB/T 16601-1996,IDT;EN ISO 11254-1-2000,IDT;NF S10-112-1-2000,IDT;SN EN ISO 11254-1-2001,IDT;OENORM EN ISO 11254-1-2001,IDT;PN-EN ISO 11254-1-2003,IDT;UNE-EN ISO 11254-1-2001,IDT
起草单位：ISO/TC 172
标准简介：This part of ISO 11254 specifies a test method for determining the single-shot laser radiation-induced damage threshold (LIDT) of optical surfaces.
This test procedure is applicable to all combinations of different laser wavelengths and pulse lengths. However comparison of laser damage threshold data may be misleading unless the measurements have been carried out at identical wavelengths, pulse lengths and beam diameters.
Application of this part of ISO 11254 is provisionally restricted to irreversible damage of optical surfaces.
NOTE Examples of units and scaling of laser-induced damage thresholds are given in annex C.
WARNING — The extrapolation of damage data can lead to inaccurate or wrong calculated results and to an overestimation of the LIDT. In the case of toxic materials (e.g. ZnSe, GaAs, CdTe, ThF4, chalcogenides, Be, Cr, Ni) this could lead to severe health hazards.
文件格式：PDF
文件大小：535.13KB
文件页数：30
（以上信息更新时间为：2019-11-23）
标准全文下载：
ISO 11254-1-2000 激光和激光设备 光学表面激光导致损伤阈值的测定 第1部分_1-on-1试验.pdf
(535.13 KB)
|
|
