标准号：EN 289-2014
中文名称：塑料和橡胶机器.压缩成型机和转移成型机.安全要求
英文名称：Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
发布日期：2014-06
代替标准：FprEN 289-2014;EN 289+A1-2008
采用标准：DIN EN 289-2014,IDT;BS EN 289-2014,IDT;NF E63-606-2014,IDT;SN EN 289-2014,IDT;OENORM EN 289-2014,IDT;PN-EN 289-2014,IDT;SS-EN 289-2014,IDT;UNE-EN 289-2014,IDT;DS/EN 289-2014,IDT;UNI EN 289:2014-2014,IDT;STN EN 289-2014,IDT;CSN EN 289-2014,IDT;DS/EN 289-2014,IDT;NEN-EN 289:2014 en-2014,IDT;SFS-EN 289:en-2014,IDT
标准简介：This European Standard specifies the essential safety requirements for compression moulding machines and transfer moulding machines for the moulding of plastics and/or rubber with a closing movement more than 6 mm. In this document a compression moulding machine or transfer moulding machine as described above is designated by the term "press" (see 3.1). This document deals with all significant hazards, hazardous situations and events relevant to presses, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The safety requirements are specified for the additional hazards arising from:- shuttle/turn tables used for loading/unloading and/or cooling; - magnetic clamping systems. For other ancillary equipment, as defined in 3.7, that is not part of the press, only the requirements for the interaction between presses and ancillary equipment, especially loading and unloading devices are specified. The following machines or units are excluded; - pneumatic presses for plastic and rubber; - injection moulding machines (see EN 201:2009); - tyre curing machines (see prEN 16474); - presses for curing inner tubes and curing bags; - hydraulic presses for the cold working of metals as covered by EN 693:2001+A2:2011; - mechanical presses for the cold working of metals as covered by EN 692:2005+A1:2009; - pneumatic presses for the cold working of metals as covered by EN 13736:2003+A1:2009; - thermoforming machines (see EN 12409:2008+A1:2011); - reaction injection moulding (RIM) machines (see EN 1612-1:1997+A1:2008); - the extruder of the carousel machine(see EN 1114-1:2011). This standard does not cover; - hazards caused by the processing of materials which may lead to a risk of explosion, see 7.2.2; - the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres; - requirements for the design of exhaust ventilation systems, see 5.3.5
文件格式：PDF
文件大小：1.40MB
文件页数：54
标准全文下载：
EN 289-2014 塑料和橡胶机器.压缩成型机和转移成型机.安全要求.pdf
(1.4 MB)
|
|
