标准号：EN 16592-2014
实施状态：现行
中文名称：包装.硬质塑料容器.聚对苯二甲酸乙二醇酯完成29/25(12,6)
英文名称：Packaging - Rigid plastic containers - PET finish 29/25 (12@6)
发布日期：2014-10
代替标准：FprEN 16592-2014
采用标准：DIN EN 16592-2015,IDT;BS EN 16592-2014,IDT;NF H35-214-2014,IDT;SN EN 16592-2014,IDT;OENORM EN 16592-2014,IDT;PN-EN 16592-2015,IDT;SS-EN 16592-2014,IDT;UNE-EN 16592-2015,IDT;DS/EN 16592-2014,IDT;UNI EN 16592:2014-2014,IDT;STN EN 16592-2015,IDT;CSN EN 16592-2015,IDT;DS/EN 16592-2014,IDT;NEN-EN 16592:2014 en-2014,IDT;SFS-EN 16592:en-2014,IDT
标准简介：This European Standard specifies the design and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish is designated PET finish 29/25 (12,6). This finish can be used for aseptic filling and filling with nitrogen charge (internal overpressure inferior to 1 bar max). The dimension (12,6) is the height in millimetres from the top of finish to the bottom of the support ledge. This finish is designed to accept a tamper evident plastic closure only. During first opening, the tamper evident band will separate from the closure shell and remain on a one way bottle neck or like bottles in the returnable market, the tamper evident band will tear but will remain connected to the closure shell.
文件格式：PDF
文件大小：1.08MB
文件页数：14
（以上信息更新时间为：2019-11-28）
EN 16592-2014 包装.硬质塑料容器.聚对苯二甲酸乙二醇酯完成29_25(12,6).pdf
(1.08 MB)
|
|
