标准号：ISO 17672-2010
实施状态：作废
中文名称：钎焊.焊料
英文名称：Brazing - Filler metals
发布日期：2010-06
被替代标准：ISO 17672-2016
代替标准：ISO/FDIS 17672-2010
采用标准：DIN EN ISO 17672-2010,IDT;BS EN ISO 17672-2010,IDT;EN ISO 17672-2010,IDT;NF A81-361-2010,IDT;SN EN ISO 17672-2010,IDT;OENORM EN ISO 17672-2010,IDT;PN-EN ISO 17672-2010,IDT
起草单位：ISO/TC 44
标准简介：This International Standard specifies the compositional ranges of a series of filler metals used for brazing. The
filler metals are divided into seven classes, related to their composition, but not necessarily to the major
element present.
NOTE 1 For the major element(s) present, see Annex A.
In the case of composite products, such as flux-coated rods, pastes or plastics tapes, this International
Standard covers only the filler metal that forms part of such products. The melting temperatures given in the
tables are only approximate, as they necessarily vary within the compositional range of the filler metal.
Therefore, they are given only for information. Technical delivery conditions are given for brazing filler metals
and products containing brazing filler metals with other constituents such as flux and/or binders.
NOTE 2 For some applications, e.g. precious metal jewellery, aerospace and dental, filler metals other than those
included in this International Standard are often used and these are covered by other International Standards to which
reference can be made.
文件格式：PDF
文件大小：218.17KB
文件页数：28
（以上信息更新时间为：2019-11-22）
ISO 17672-2010 钎焊.焊料.pdf
(218.17 KB)
|
|
