标准号：ISO 2082-2008
实施状态：现行
中文名称：金属和其它无机涂层.对铁或钢进行辅助处理的镉电镀层
英文名称：Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel
发布日期：2008-12
代替标准：ISO 2082-1986;ISO/FDIS 2082-2008
采用标准：DIN EN ISO 2082-2009,IDT;BS EN ISO 2082-2009,IDT;GB/T 13346-2012,IDT;EN ISO 2082-2008,IDT;NF A91-053-2009,IDT;SN EN ISO 2082-2009,IDT;OENORM EN ISO 2082-2009,IDT;PN-EN ISO 2082-2009,IDT;PN-EN ISO 2082-2011,IDT;SS-EN ISO 2082-2008,IDT;UNE-EN ISO 2082-2010,IDT;SANS 2082-2011,IDT;DS/EN ISO 2082-2009,IDT;UNI EN ISO 2082-2009-2009,IDT;STN EN ISO 2082-2009,IDT;SANS 2082-2011;SABS ISO 2082-2011-2011,IDT;CSN EN ISO 2082-2009,IDT;DS/EN ISO 2082-2009,IDT;NEN-EN-ISO 2082-2009 en-2009,IDT;SANS 2082-2011;SABS ISO 2082-2011-2011,IDT
起草单位：ISO/TC 107
标准简介：This International Standard specifies the requirements of electroplated coatings of cadmium with
supplementary treatments on iron and steel. It includes information that is to be supplied by the purchaser to
the electroplater, and describes coating requirements, including those for heat treatment before and after
electroplating.
It is not applicable to coatings applied
-to sheet, strip or wire in the non-fabricated form,
-to close-coiled springs, or
-for purposes other than protective, intrinsic lubricity, ductility, electrical conductivity and low contact
resistance use.
This International Standard does not specify requirements for the surface condition of the basis metal prior to
electrodeposition with cadmium.
The coating thickness that can be applied to threaded components can be limited by dimensional
requirements, including class or fit.
文件格式：PDF
文件大小：220.84KB
文件页数：22
（以上信息更新时间为：2019-11-22）
ISO 2082-2008 金属和其它无机涂层.对铁或钢进行辅助处理的镉电镀层.pdf
(220.84 KB)
|
|
